Subaru IMPREZA GD 2007 Series Manual page 4150

asieps_tobira_IM_US.book 54 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SECURITY AND LOCKS
28.Interrupt Relay
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the audio. <Ref. to ET-6, REMOVAL,
Audio.>
3) Remove the interrupt relay.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Connect terminal No. 3 to the battery positive termi-
nal, and terminal No. 1 to the battery negative ter-
minal, and measure the resistance between
interrupt relay terminals (shown in the following ta-
ble).
Current Terminal No.
Powered
2 and 5
No power
Powered
4 and 5
No power
(A) Battery
Replace the interrupt relay if there is a problem.
CAUTION:
Make sure to connect the battery positive termi-
nal and negative terminal correctly. If connect-
ed in error by accident, replace the interrupt
relay.
Interrupt Relay
SL-00501
Standard
1 MΩ or more
Less than 1 Ω
Less than 1 Ω
1 MΩ or more
3 2 1
4
5
(A)
SL-00500
SL-54