Subaru IMPREZA GD 2007 Series Manual page 4077

asieps_tobira_IM_US.book 13 ページ ２０１２年１月１７日 火曜日 午後３時４８分
6. Rear Seat Belt
A: REMOVAL
1. OUTER SEAT BELT ASSEMBLY RH AND
LH (SEDAN MODEL)
1) Remove the rear seat. <Ref. to SE-13, REMOV-
AL, Rear Seat.>
2) Remove the side sill rear lower cover. <Ref. to
EI-51, REMOVAL, Lower Inner Trim.>
3) Remove the seat belt lower anchor bolt.
4) Remove the anchor cover. Remove the bolt from
the pillar, and then remove the shoulder anchor.
5) Remove the quarter pillar trim. <Ref. to EI-52,
REMOVAL, Rear Quarter Trim.>
6) Remove the bolts, and then detach the outer
seat belt assembly.
Rear Seat Belt
7) Remove the two bolts to remove the adjustable
anchor assembly.
2. SHOULDER SEAT BELT CENTER AS-
SEMBLY (SEDAN MODEL)
1) Remove the rear seat cushion. <Ref. to SE-13,
REMOVAL, Rear Seat.>
2) Remove the seat belt lower anchor bolt.
SB-00084
3) Remove the quarter pillar trim. <Ref. to EI-52,
REMOVAL, Rear Quarter Trim.>
4) Remove the rear shelf trim. <Ref. to EI-58, RE-
MOVAL, Rear Shelf Trim.>
5) Remove the bolts, then remove the shoulder
SB-00085
seat belt assembly.
SB-00086
SB-13
SEAT BELT SYSTEM
SB-00087
SB-00088
SB-00089