Subaru IMPREZA GD 2007 Series Manual page 4133

asieps_tobira_IM_US.book 37 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Rear Gate Outer Handle
SECURITY AND LOCKS
13.Rear Gate Outer Handle
A: REMOVAL
1) Remove the rear gate trim. <Ref. to EI-57, RE-
MOVAL, Rear Gate Trim.>
2) Remove the rear gate latch assembly. <Ref. to
SL-38, REMOVAL, Rear Gate Latch Assembly.>
3) Remove the two nuts to remove the rear gate
outer handle.
SL-00185
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure that the rear gate outer handle works
properly after installation.
C: INSPECTION
1) Check the rod for deformation.
2) Make sure that the outer handle and cable move
smoothly.
SL-37