Subaru IMPREZA GD 2007 Series Manual page 4136

asieps_tobira_IM_US.book 40 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Trunk Lid Lock Assembly
SECURITY AND LOCKS
16.Trunk Lid Lock Assembly
A: REMOVAL
1) Remove the trunk lid key cylinder rod clamp.
2) Loosen the two bolts to remove the trunk lid lock
assembly.
SL-00189
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to the movable part.
• Make sure the lock works properly after installa-
tion.
C: INSPECTION
1) Check the striker for deformation or abnormal
wear.
2) Check the safety lever for improper movement.
3) Check other levers and the spring for rust forma-
tion and unsmooth movement.
SL-40