Subaru IMPREZA GD 2007 Series Manual page 4172

asieps_tobira_IM_US.book 8 ページ ２０１２年１月１７日 火曜日 午後３時４８分
WIPER AND WASHER SYSTEMS
4. Wiper Blade
A: REMOVAL
1. FRONT
While pushing the locking clip (A) up, pull out the
blade in the direction of the arrow and remove it
from the wiper arm.
2
3
2. REAR
Turn the blade in the direction of arrow (A) and re-
move it from arm.
(3)
(A) Turn the wiper blade.
1) Wiper arm
2) Wiper blade
3) Wiper blade attachment section
B: INSTALLATION
1) Install in the reverse order of removal.
2) Confirm that the clip is locked securely.
Wiper Blade
3
(A)
2
1
WW-00064
(1)
(2)
(A)
WW-00207
WW-8
C: DISASSEMBLY
1. FRONT
Pull side (A) of the wiper rubber stopper and re-
move the rubber from the blade assembly.
2. REAR
Pull the wiper rubber top slightly from stopper (A)
and pull out completely.
(A)
D: ASSEMBLY
1. FRONT
1) Insert the wiper rubber onto the blade so that the
stopper is in the position shown in the figure.
WW-00009
WW-00143
WW-00196