Subaru IMPREZA GD 2007 Series Manual page 4010

asieps_tobira_IM_US.book 27 ページ ２０１２年１月１７日 火曜日 午後３時４８分
20.Tail/Stop Light Bulb
A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk side trim of rear portion.
2) Turn the socket and remove the bulb.
(A)
(A) Tail light
(B) Stop/tail light
2. WAGON MODEL
1) Remove the rear combination light assembly.
<Ref. to LI-26, WAGON MODEL, REMOVAL, Rear
Combination Light Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
Tail/Stop Light Bulb
(B)
LI-00562
LI-00570
LI-27
LIGHTING SYSTEM