DI−852
3
Check for open and short circuit in harness and connector between each speed
sensor and Skid Control ECU (See page IN−30).
OK
4
Check speed sensor installation.
Front
OK
Rear
BR3795
F10178
OK
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
NG
CHECK:
Check the speed sensor installation.
OK:
NG
NG
F10452
NG
NOTICE:
Check the speed sensor signal again at the end of the pro-
cedure (See page DI−836).
−
ANTI−LOCK BRAKE SYSTEM WITH ELECTRONIC
BRAKE FORCE DISTRIBUTION (EBD)
Repair or replace harness or connector.
Front:
The installation bolt is tightened properly and there is
no clearance between the sensor and the steering
knuckle.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
Rear:
There is no clearance between the sensor and the
rear axle carrier.
Replace speed sensor.
1052