Dell C9000 Series Reference Manual page 1998

port port-number
[version {1 | 2}]
Defaults
•
•
•
•
•
•
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
When FIPS is enabled, the default key-exchange-algorithm is
diffie-hellman-group14-sha1.
When FIPS is not enabled, the default key-exchange-algorithms
are the following:
•
diffie-hellman-group-exchange-sha1
•
diffie-hellman-group1-sha1,
•
diffie-hellman-group14-sha1
(OPTIONAL) Enter the keyword port then the port number of
the listening port of the SSH server. The range is from 1 to
65535. The default is 22.
(OPTIONAL) Enter the keyword version then the SSH version 1
or 2 to specify only SSHv1 or SSHv2.
NOTE:
version 2.
Default listening port is 22.
Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-
ctr,aes192-ctr,aes256-ctr.
When FIPS is enabled, the default is hmac-sha1-96.
When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-
sha1,hmac-sha1-96,hmac-sha2-256.
When FIPS is enabled, the default is diffie-hellman-group14-sha1.
When FIPS is not enabled, the default is diffie-hellman-group-exchange-
sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1.
Description
Introduced on the C9010.
Introduced the cipher, kex and mac options on the Z9500.
Introduced the cipher, kex and mac options on the Z9000,
S6000, S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
If you enable FIPS mode, you can only select
Security 1998