Privilege Level (Line Mode) - Dell S4810 Reference Manual

Usage To define a password for the level to which you are assigning privilege or access,
Information use the enable password command.

privilege level (LINE mode)

Change the access level for users on the terminal lines.
S4810
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level
command.
Parameters
level level
Defaults level = 15
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Authentication and Password Commands
To manage access to the system, use the following the commands.
Security
Enter the keyword level then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1451