Table 186: Chassis Status Leds On A Qfx3500 Device - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:
Table of Contents

Advertisement

QFX3000-G QFabric System Hardware Documentation

Table 186: Chassis Status LEDs on a QFX3500 Device

Name
Color
State
Power
Green
On steadily
Amber
Blinking
Status
Green
On steadily
Intermittent
blinking
Amber
Blinking
Fan
Green
On steadily
Amber
Blinking
Related
Documentation
Management Port LEDs on a QFX3500 Device
758
Description
The device is powered on.
A temperature or voltage error has been detected, and the device has shut down.
Power off the QFX3500 device by setting the AC power source outlet to the OFF
(O) position, or unplugging the AC power cords. Correct any site temperature issues,
and allow the device to cool down. Power on the QFX3500 device and monitor
the power supply and fan LEDs to help determine where the error is occurring. If
the amber Power LED begins blinking again, power off the QFX3500 device and
contact customer support. See
Materials Authorization for a QFX Series Device or Component" on page
Junos OS has been loaded on the device.
The beacon feature has been enabled on the device using the
command.
beacon
A software error has occurred. Power off the QFX3500 device by setting the AC
power source outlet to the OFF (O) position, or unplugging the AC power cords.
Power on the QFX3500 device and monitor the management board LEDs to ensure
that Junos OS boots properly.
The fan modules on the management board are operating normally.
An error has been detected in the fan modules installed on the management board.
Replace the management board as soon as possible. You must power off the
QFX3500 device before replacing the management board. See
Management Board from a QFX3500 Device" on page
Front Panel of a QFX3500 Device on page 122
Chassis Alarm Messages on a QFX3500 Device on page 905
The management ports (labeled
indicate link speed and activity (see
NOTE:
Figure 336 on page 759
The LEDs on the SFP management ports are identical.
"Contacting Customer Support to Obtain a Return
and
) on a QFX3500 device have two LEDs that
C0
C1
Figure 336 on page
759).
depicts the 1000BASE-T management ports.
Copyright © 2018, Juniper Networks, Inc.
895.
request chassis
"Removing a
654.

Advertisement

Table of Contents
loading

Table of Contents