Figure 294: Installing A 4-Port Sfp+ Uplink Module In A 24-Port Or 48-Port Ex4300 Switch Except Ex4300-48Mp And Ex4300-48Mp-S Switches; Figure 295: Installing A 2-Port Qsfp+ Uplink Module In A 32-Port Ex4300; Switch; Figure 296: Installing An 8-Port Sfp+ Uplink Module In A 32-Port Ex4300 - Juniper QFabric QFX3000-G Hardware Documentation

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Figure 294: Installing a 4-Port SFP+ Uplink Module in a 24-Port or 48-Port EX4300
Switch Except EX4300-48MP and EX4300-48MP-S Switches
NOTE: The procedure is the same for EX4300-48MP and EX4300-48MP-S
switches.
Figure 295: Installing a 2-Port QSFP+ Uplink Module in a 32-Port EX4300 Switch
Figure 296: Installing an 8-Port SFP+ Uplink Module in a 32-Port EX4300 Switch
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Chapter 45: Replacing EX4300 Components
. Failure
689