Table 172: Management Port Leds On A Qfx5100 Switch - Juniper QFabric QFX3000-G Hardware Documentation

Table 172: Management Port LEDs on a QFX5100 Switch

LED Color
Link/Activity Unlit
Green
Status Unlit
Green
Amber
Related
Documentation
Access Port and Uplink Port LEDs on a QFX5100 Device
Copyright © 2018, Juniper Networks, Inc.
State
Off
On steadily
Blinking or flickering
Off
On steadily
On steadily
Management Panel of a QFX5100 Device on page 85
Connecting a QFX5100 Device to a Network for Out-of-Band Management
The Link/Activity and Status LED configuration for QFX5100 switches use bi-colored
LEDs. The link LED indicates link activity or a fault. The status LED indicates transceiver
presence. See Table 173 on page 742
QFX5100 model.
Chapter 51: Viewing QFX5100 System Information
Description
No link is established, there is a fault, or the link is down.
A link is established, but there is no link activity.
A link is established, and there is link activity.
Either the port speed is 10 M or the link is down.
The port speed is 1000 M.
The port speed is 100 M.
to locate the position and type of LED for your
741