Juniper QFabric QFX3000-G Hardware Documentation page 910

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
860
Issue the
show fabric administration inventory director-group status | grep "dg0|dg1"
command.
root@qfabrid>
show fabric administration inventory director-group status | grep
"dg0|dg1"
dg0 online master 10.94.214.80
dg1 online master 10.94.214.81
dg0 0281042010000013
dg1 0281042010000018
When the Director devices cannot communicate, the
inventory director-group
Power Off the Isolated Director Device and Restore the Inter-Director Device Links
CAUTION: Be sure you know which Director device is active and which is
isolated. If you power off the active Director device, both Director devices
reboot and cause potential data loss on the system.
To restore communication within the Director group:
Power off the isolated Director device.
1.
Restore the inter-Director device links (port
2.
patch cables.
Power on the previously isolated Director device. The Director device reboots.
3.
Connecting QFX3100 Director Devices in a Director Group on page 500
0% 13597976k
0% 18677380k
online master
online backup
command only displays the Director device that is online.
to port
3 3
4 4 days, 22:36 hrs
3 4 days, 22:25 hrs
show fabric administration
) by firmly inserting the redundant
Copyright © 2018, Juniper Networks, Inc.