Table 142: Qfx3100 Director Device-To-Virtual Chassis Control Plane Port Assignments For Dg0; Table 143: Second Qfx3100 Director Device-To-Virtual Chassis Control Plane - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation

Table 142: QFX3100 Director Device-to-Virtual Chassis Control Plane Port Assignments for DG0

Network Module Port Network Module Port
0 1
Virtual Chassis port Virtual Chassis port
ge-0/0/40 ge-1/0/40
Table 143: Second QFX3100 Director Device-to-Virtual Chassis Control Plane Port Assignments for DG1
Network Module Port Network Module Port
0 1
Virtual Chassis port Virtual Chassis port
ge-0/0/41 ge-1/0/41
504
See Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure) or
Configuring an EX2300, EX3400, or EX4300 Virtual Chassis.
Interconnect the two Virtual Chassis switches using the 10-Gigabit Ethernet SFP+
uplink ports. See "Interconnecting Two Virtual Chassis for Copper-Based QFX3000-G
QFabric System Control Plane Redundancy" on page
Connect the two QFX3100 Director devices to create a Director group. See
QFX3100 Director Devices in a Director Group" on page
Ensure that you have enough RJ-45 patch cables available, and ensure that the cables
meet the specifications described in
Plane Connections for the QFabric System" on page
To connect a QFX3100 Director device to the QFX3000-G QFabric control plane network
(see Figure 217 on page 503):
Connect both network modules on the first Director device (labeled
1.
Figure 217 on page 503) to the two Virtual Chassis (labeled
Figure 217 on page 503). You connect the first three ports (labeled
first network module to the first Virtual Chassis (
on the second network module (also labeled
( ). The ports used are the same on each Virtual Chassis.
VC0VC1
Network Module Port
2
Virtual Chassis port
ge-2/0/40
Connect both network modules on the second Director device (labeled
2.
Figure 217 on page 503) to the two Virtual Chassis (labeled
Figure 217 on page 503). You connect the first three ports on the first network module
to the first Virtual Chassis (
network module to the second Virtual Chassis (
each Virtual Chassis.
Network Module Port
2
Virtual Chassis port
ge-2/0/41
497.
"Cable Specifications for Copper-Based Control
265.
. You connect the first three ports
VC0
0 through
Network Module Port 3
Connect this port to the identical port on the
other Director device. See
QFX3100 Director Devices in a Director
Group" on page 500
). You connect the first three ports on the second
VC0
). The ports used are the same on
VC1
Network Module Port 3
Connect this port to the identical port on the
other Director device. See
QFX3100 Director Devices in a Director Group"
on page 500
Copyright © 2018, Juniper Networks, Inc.
"Connecting
500.
in
DG0
VC0 and VC1 in
through ) on the
0 2
2 ) to the second Virtual Chassis
"Connecting
.
DG1 in
and in
VC0 VC1
"Connecting
.