Juniper QFabric QFX3000-G Hardware Documentation page 400

QFX3000-G QFabric System Hardware Documentation
Laser and LED Safety Guidelines and Warnings for the QFX Series
Class 1M Laser Product Warning
350
¡Atención! Debido a que la apertura del puerto puede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
In addition to the general guidelines provided in Laser and LED Safety Guidelines and
Warnings, follow these warnings and guidelines that are specific to QFX Series devices.
QFX Series devices are equipped with laser transmitters:
SFP and SFP+ transceivers are classified as Class 1 Laser Products (complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, dated July
26, 2001) or Class 1 LED Products.
QSFP+ and QSFP28 transceivers are classified as Class 1M Laser Products (IEC 60825-1
2001–01).
Observe the following guidelines and warnings:
Class 1M Laser Product Warning on page 350
Class 1M Laser Radiation Warning on page 351
Unterminated Fiber-Optic Cable Warning on page 351
WARNING: Class 1M laser product.
Waarschuwing Laserproducten van Klasse 1M (IEC).
Varoitus Luokan 1M (IEC) lasertuotteita.
Attention Produits laser catégorie 1M (IEC).
Warnung Laserprodukte der Klasse 1M (IEC).
Avvertenza Prodotti laser di Classe 1M (IEC).
Advarsel Klasse 1M (IEC) laserprodukter.
Aviso Produtos laser Classe 1M (IEC).
¡Atención! Productos láser de Clase 1M (IEC).
Varning! Laserprodukter av Klass 1M (IEC).
Copyright © 2018, Juniper Networks, Inc.