Figure 121: Connecting A Grounding Cable To An Ex Series Switch - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Connecting Earth Ground to an EX Series Switch
Related
Documentation
182
To connect earth ground to a switch:
Connect one end of the grounding cable to a proper earth ground, such as the rack in
1.
which the switch is mounted.
Place the grounding lug attached to the grounding cable over the protective earthing
2.
terminal. See Figure 121 on page

Figure 121: Connecting a Grounding Cable to an EX Series Switch

Secure the grounding lug to the protective earthing terminal with the washers and
3.
screws.
Dress the grounding cable and ensure that it does not touch or block access to other
4.
switch components.
WARNING: Ensure that the cable does not drape where people could trip
over it.
General Safety Guidelines and Warnings on page 329
Grounded Equipment Warning on page 347
182.
Copyright © 2018, Juniper Networks, Inc.