Figure 45: Qfx5100-48T Or Qfx5100-48Th Switch Port Panel - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
80

Figure 45: QFX5100-48T or QFX5100-48TH Switch Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10GBASE-T ports (48)
The QFX5100-48T and QFX5100-48TH device ports, (
connectors. The 40 G uplink or data ports (
QSFP+ transceivers
QSFP+ to QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ DAC breakout cables (DACBO)
QSFP+ to QSFP+ active optical cables (AOC)
QSFP+ to SFP+ AOC breakout cables (AOCBO)
To connect a QFX5100-48T switch as a Node device in a QFabric system, you need:
Four QSFP+ uplink ports on each QFX5100-48T Node device to connect to the data
plane network through the QFX3008-I or QFX5100-24Q Interconnect devices.
The two remaining QSFP+ uplink ports on each QFX5100-48T Node device connect
to the data plane network through the QFX3008-I or QFX5100-24Q Interconnect
devices.
Access port pinouts for the QFX5100-48T switch are the same as the management port
connector pinouts for the QFX Series. For more information, see
Connector Pinouts for the QFX Series" on page
Access Port and Uplink Port LEDs on a QFX5100 Device on page 741
Field-Replaceable Units in a QFX5100 Device on page 75
Port Panel of a QFX5100-24Q Device on page 81
Port Panel of QFX5100-48S and QFX5100-48SH Devices on page 77
Port Panel of a QFX5100-96S Device
Installing and Removing QFX5100 Device Hardware Components on page 665
Connecting QFX Series and EX Series Switches in a QFX Virtual Chassis
Connecting a QFX5100 Device in a Virtual Chassis Fabric
Management Port Connector Pinouts for the QFX Series on page 260
3— 40 GbE ports (6)
through ) support RJ45
0 47
through ) support:
48 53
"Management Port
260.
Copyright © 2018, Juniper Networks, Inc.