Figure 314: Leds On The Management Port On A Qfx3100 Director Device - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

QFX3000-G QFabric System Hardware Documentation

Table 159: Chassis LEDs on a QFX3100 Director Device (continued)

Documentation

Management Port LEDs on a QFX3100 Director Device

Fast blinking

Slow blinking

Front Panel of a QFX3100 Director Device on page 30

The management port (labeled

that indicate link/activity and speed (see

Figure 314: LEDs on the Management Port on a QFX3100 Director Device

Link/Activity

Table 160 on page 723

describes the Link/Activity and Speed LED.

Data is not being read from or written to the hard

Data is being read from or written to the hard disk

QFX3100 Director device hardware has no major

(red) alarm conditions.

QFX3100 Director device hardware is hotter than

the maximum high temperature threshold.

At least one fan has failed.

A power supply is not supplying power to the

QFX3100 Director device.

) on the QFX3100 Director device has two LEDs

Figure 314 on page

Table of Contents