Figure 325: Management Port Leds On A Qfx5100 Switch - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
740

Figure 325: Management Port LEDs on a QFX5100 Switch

1— Status LEDs
2— em1–SFP management Ethernet port (C1)
Cage (socket for either 10/100/1000 Base-T
RJ45 SFP or 1GbE fiber SFP)
3— Reset
button, see caution statement below
CAUTION: Do not use the
under the direction of Juniper Networks Technical Assistance Center (JTAC).
Table 172 on page 741 describes the management port LEDs.
4— em0–RJ-45 (10/100/1000 Base-T)
management Ethernet port (C0)
5— RJ-45 console port (CON)
6— USB port
button to restart the power sequence unless
Reset
Copyright © 2018, Juniper Networks, Inc.