Juniper QFabric QFX3000-G Hardware Documentation page 581

Copyright © 2018, Juniper Networks, Inc.
Chapter 36: Cabling a Fiber-Based Control Plane for the QFX3000-G QFabric System
To connect each QFX3600-I Interconnect device to the fiber-based control plane network:
WARNING: Do not look directly into a fiber-optic transceiver or into the ends
of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected
to transceivers emit laser light that can damage your eyes.
NOTE: Before you connect each cable to a device, if the fiber-optic cable
connector is covered by a rubber safety cap, remove the cap. If the transceiver
is covered with a rubber safety cap, remove the cap. Save the caps for future
use.
Connect the first QFX3008-I Interconnect device.
1.
Connect one end of the first fiber optic cable to the SFP optical transceiver in the
a.
first management port labeled (labeled
).
0
Connect the other end of that cable to port
b.
Connect one end of the second fiber optic cable to the SFP optical transceiver in
c.
the second management port (labeled
Connect the other end of that cable to port
d.
Connect one end of the third fiber optic cable to the SFP optical transceiver in the
e.
first management port labeled (labeled
).
CB 1
Connect the other end of that cable to port
f.
Connect one end of the fourth fiber optic cable to the SFP optical transceiver in
g.
the second management port (labeled
Connect the other end of that cable to port
h.
Connect the second QFX3008-I Interconnect device.
2.
Connect one end of the first fiber optic cable to the SFP optical transceiver in the
a.
first management port labeled (labeled
0 ).
Connect the other end of that cable to port
b.
) on the first Control Board (labeled
0
on the first Virtual Chassis.
ge-0/0/19
) on .
1 CB0
on the second Virtual Chassis.
ge-0/0/19
0 ) on the second Control Board (labeled
on the first Virtual Chassis.
ge-1/0/19
) on .
1 CB1
on the second Virtual Chassis.
ge-1/0/19
) on the first Control Board (labeled
0
ge-2/0/19 on the first Virtual Chassis.
CB
CB
531