Juniper QFabric QFX3000-G Hardware Documentation page 908

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
858
ge-0/0/20
ge-0/0/21
Copper or fiber EX Series VC1 interfaces:
ge-0/0/22
ge-0/0/23
On a QFX3000-G QFabric system using copper connections, enable port
Director Group 1 or port
Copper EX Series VC0 interfaces:
ge-0/0/40
ge-1/0/40
ge-2/0/40
Copper EX Series VC1 interfaces:
ge-0/0/41
ge-1/0/41
ge-2/0/41
Fiber EX Series VC0 interfaces:
ge-0/0/22
ge-1/0/22
ge-2/0/22
Fiber EX Series VC1 interfaces:
ge-0/0/23
ge-1/0/23
ge-2/0/23
Power on the Director device, see
3.
and synchronization of the RAID begins. Synchronizing data while the system is
operational can take up to 17 hours. When synchronization is complete, the RAID is
considered optimal.
QFX3100 Director Device Overview on page 25
Removing an HDD Module from a QFX3100 Director Device on page 599
Installing an HDD Module in a QFX3100 Director Device on page 601
41 for Director Group 2.
"Powering On a QFX3100 Director Device" on page
Copyright © 2018, Juniper Networks, Inc.
for
40
385,