Juniper QFabric QFX3000-G Hardware Documentation page 600

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
550
Insert the cable connector into the optical transceiver.
6.
Secure the cables so that they are not supporting their own weight. Place excess cable
7.
out of the way in a neatly coiled loop. Placing fasteners on a loop helps cables maintain
their shape.
CAUTION: Do not bend fiber-optic cables beyond their minimum bend
radius. Bending the cables beyond their minimum bend radius can damage
the cables and cause problems that are difficult to diagnose.
Do not let fiber-optic cables hang free from the connector. Do not allow
fastened loops of cables to dangle, which stresses the cables at the
fastening point.
Determining Transceiver Support for QFabric Systems on page 258
Copyright © 2018, Juniper Networks, Inc.