Juniper QFabric QFX3000-G Hardware Documentation page 374

QFX3000-G QFabric System Hardware Documentation
Compliance Statements for Acoustic Noise for EX Series Switches
Statements of Volatility for Juniper Network Devices
324
EX4600-40F and EX4600-40F-S
All EX6200 switches
NOTE: For the EX6200-48P line cards, the intrabuilding ports must use
shielded intrabuilding cabling or wiring that is grounded at both ends.
All EX8200 switches
EX9251
EX9253
These switches meet the following NEBS compliance standards:
SR-3580 NEBS Criteria Levels (Level 4 Compliance)
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment
GR-63-CORE: NEBS, Physical Protection
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect
power. The device must also be rated based on local electrical code practice.
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäss EN ISO 7779
Translation:
The emitted sound pressure is below 70 dB(A) per EN ISO 7779.
A statement of volatility—sometimes known as letter of volatility—identifies the volatile
and non-volatile storage components in Juniper Networks devices, and describes how
to remove non-volatile storage components from the device.
Copyright © 2018, Juniper Networks, Inc.