Figure 64: Qfx3600 Chassis Front; Figure 65: Qfx3600 Chassis Rear - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

Figure 64: QFX3600 Chassis Front

1-Gbps SFP management port

Power supplies

The front panel of the QFX3600 chassis has an LCD panel that displays the device

hostname and the number of active alarms. It also has sixteen 40-Gbps ports labeled

that support quad small form-factor pluggable plus (QSFP+) transceivers.

"Front Panel of a QFX3600 Device" on page

If you are using the QFX3600 device as a Node device in a QFabric system, by default,

four ports (labeled

QFX3600 Node device and your Interconnect device, and twelve ports (labeled

) support 48 10-Gigabit Ethernet or 12 40-Gigabit Ethernet interfaces for

connections to either endpoint systems (such as servers and storage devices) or external

networks. Optionally, you can choose to configure the first eight ports (labeled

) for uplink connections between your QFX3600 Node device and your Interconnect

device and ports

connections to either endpoint systems or external networks. See

Type on QFX3600 Node Devices" on page 714

QFX3600 Device.

If you are using the QFX3600 device as a standalone switch, by default, all 16 QSFP+

) are configured as 40-Gigabit Ethernet (xle) ports. Optionally,

you can choose to configure each port to operate as 10-Gigabit Ethernet (xe) ports. Port

is unique because the number of ports you can specify as 10-Gigabit Ethernet varies

by Junos OS release. In some Junos OS releases, port

1-Gbps SFP management port

1000BASE-T RJ-45 management port

1000BASE-T RJ-45 management port

) are configured for uplink connections between your

for 10-Gigabit Ethernet or 40-Gigabit Ethernet

and Determining Interface Support for the

Chapter 5: QFX3600 Overview

"Configuring the Port

has a reserved port and in other

Table of Contents