Juniper QFabric QFX3000-G Hardware Documentation page 895

Copyright © 2018, Juniper Networks, Inc.
Because the root password has been removed as part of the recovery process, press
7.
Enter a second time to skip the password entry step.
NOTE: Do not enter a root password at this time.
The following menu appears on the Director device console:
8.
Before you can access the QFabric system, you must complete the initial setup
of the Director group by using the steps that follow.
If the initial setup procedure does not complete successfully, log out of the
Director device and then log back in to restart
this setup menu.
Continue?[y/n]
Enter n to bypass the initial setup script and enter the Director device root directory,
9.
where you can mount the external USB flash drive containing the configuration files
and initial setup information.
Issue the ls /mnt command to list the mount directory.
10.
root@dg0 ~]# ls /mnt
Issue the mkdir command to create a directory within the mount directory.
11.
root@dg0 ~]# mkdir /mnt/myusb
Issue the mount /dev/sdb2 /mnt/myusb/ command to mount the external USB
12.
flash drive to the local drive of the Director device.
root@dg0 ~]# mount /dev/sdb2 /mnt/myusb/
Issue the ls -la /mnt/myusb/ command to verify the contents of your mounted
13.
external USB flashdrive.
root@dg0 ~]# ls -la /mnt/myusb/
total 1770884
drwxr-xr-x 2 root root
drwxr-xr-x 3 root root
-rw-r--r-- 1 root root
Exit the Director device and log back in as root on the Director device.
14.
The following menu appears:
Before you can access the QFabric system, you must complete the initial setup
of the Director group by using the steps that follow.
If the initial setup procedure does not complete successfully, log out of the
Director device and then log back in to restart
this setup menu.
Continue?[y/n] y
Initial Configuration
4096 Sep 7 05:16 .
4096 Sep 7 10:15 ..
4249 Sep 7 03:52 mybackup-20110907
Chapter 56: Restoring Junos OS
845