Table 229: Status Of A Member Switch In A Virtual Chassis - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

QFX3000-G QFabric System Hardware Documentation

Table 228: Details of a Virtual Chassis Member Switch (continued)

Assigned ID that applies to the entire Virtual Chassis

configuration

Role of the member switch

Status of the member switch

Table 229: Status of a Member Switch in a Virtual Chassis

If the member switch is

Not provisioned

The status of the member switch is displayed on the image of the switch. If the member

switch appears dimmed, it means the switch is not present, is inactive, or is not provisioned

in the Virtual Chassis. If the member switch does not appear dimmed, it means the switch

is present and is active.

Table 205 on page 781

describes the possible status of a member switch.

It appears as

for a graphical view of the rear panel of the switch.

to choose which panels must be displayed and set the refresh interval

for chassis viewer information. Click

to return to the dashboard without saving changes.

You can drag the various panels to different locations in the J-Web

If the member switch is not provisioned, the serial number

of the switch is displayed instead of its ID.

Possible roles are:

Possible statuses are:

It means the member switch

Has established physical and logical connections with Virtual

Chassis member switches.

Has been disconnected from the existing Virtual Chassis.

Has established physical connections, but is unable to establish

logical connections.

Cannot synchronize with the existing preprovisioned Virtual

to save your changes and return to the dashboard

Table of Contents