Juniper QFabric QFX3000-G Hardware Documentation page 335

Table 108: AC Power Cord Specifications for a Single-Phase Wiring Tray (continued)
Country/Region
Japan
North America
South Korea
Switzerland
United Kingdom
Related
Documentation
AC Power Cord Specifications for a QFX3008-I Interconnect Device with Three-Phase
Delta Wiring Trays
Copyright © 2018, Juniper Networks, Inc.
Electrical Specifications
250 VAC, 16 A, 50 Hz
125VAC, 15A, 50 Hz
250 VAC, 16 A, 50 Hz
125 VAC, 20 A, 50 Hz
250 VAC, 16 A, 50 Hz
250 VAC, 16 A, 50 Hz
250 VAC, 13 A, 50 Hz
AC Power Supply in a QFX3008-I Interconnect Device on page 56
General Electrical Safety Guidelines and Warnings on page 359
AC Power Electrical Safety Guidelines on page 362
AC Power Disconnection Warning on page 363
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays on page 411
Most sites distribute power through a main conduit that leads to frame-mounted power
distribution panels, one of which can be located at the top of the rack that houses the
device. An AC power cord connects each wiring tray to the power distribution panel.
WARNING: The QFX3008-I Interconnect device is pluggable type A equipment
installed in a restricted-access location. It has a separate protective earthing
terminal provided on the chassis in addition to the grounding pin of the power
supply cord. This separate protective earthing terminal must be permanently
connected to earth.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
Chapter 14: Planning QFX3008-I Power Requirements
Plug Standards
NEMA 6-20 Type N6/20
NEMA L6-20 Type NEMA Locking
NEMA 5-20 Type N5/20
NEMA 6-20 Type N6/20
NEMA L6-20 Type NEMA Locking
NEMA 5-20 Type N5/20
CEE(7) VII Type VIIG
SEV 5934-2 Type 23G
BS 1363/A Type BS89/13
285