Juniper QFabric QFX3000-G Hardware Documentation page 635

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

Documentation

Removing a QFX3500 Device from a Rack or Cabinet

Before removing a QFX3600 or QFX3600-I device from a rack:

Ensure that the rack is stable and secured to the building.

Ensure that there is enough space to place the removed QFX3600 or QFX3600-I device

in its new location and along the path to the new location.

"General Safety Guidelines and Warnings" on page

Ensure that the QFX3600 or QFX3600-I device has been safely powered off (see

Powering Off a QFX3600 Device) and that you have unplugged (disconnected) the

power cords.

Ensure that you have disconnected any cables or wires attached to the QFX3600 or

QFX3600-I device ports.

Ensure that you have the following parts and tools available:

A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack

mounting screws, for mounting the QFX3600 or QFX3600-I device on the rack.

To remove a QFX3600 or QFX3600-I device from a rack or cabinet:

Have one person support the weight of the device while another person uses the

screwdriver to remove the mounting screws that attach the chassis front-mounting

or mid-mounting brackets to the rack or cabinet.

Remove the QFX3600 or QFX3600-I device from the rack or cabinet.

If you installed the chassis on a four-post rack using the installation blades, use the

screwdriver to remove the mounting screws that attach the installation blades to the

rear of the rack.

Save the removed screws and installation blades. You will need them when you

reinstall the chassis.

Transport the QFX3600 or QFX3600-I device to your desired new location.

Mounting a QFX3600 or QFX3600-I Device on Two Posts in a Rack or Cabinet on

Mounting a QFX3600 or QFX3600-I Device on Four Posts in a Rack or Cabinet on

If you need to relocate an installed QFX3500 device, use the procedure described in this

topic. (The remainder of this topic uses "rack" to mean "rack or cabinet." )

Chapter 39: Removing or Replacing a Device

Chapters

Table of Contents