Juniper QFabric QFX3000-G Hardware Documentation page 766

QFX3000-G QFabric System Hardware Documentation
716
root@qfabric# delete fte port-range 4 7
To delete the 40-gigabit data plane uplink (fte) port configuration for an individual
5.
port, specify a port number:
[edit chassis node-group name node-device name pic 1]
root@qfabric# delete fte port port-number
For example, to delete the 40-gigabit data plane uplink port configuration for port
Q4:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 1]
root@qfabric# delete fte port 4
The following steps describe how to configure either a block of ports or an individual port
to operate as 10-Gigabit Ethernet (xe) ports, as well as how to delete a 10-Gigabit Ethernet
(xe) port configuration.
To configure a block of ports to operate as 10-Gigabit Ethernet (xe) ports, specify a
1.
port range:
[edit chassis node-group name node-device name pic 0]
root@qfabric# set xe port-range port-range-low port-range-high
For example, to configure ports Q4 through Q7 to operate as 10-Gigabit Ethernet ports:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 0]
root@qfabric# set xe port-range 4 7
To configure an individual port to operate as a 10-Gigabit Ethernet port, specify a port
2.
number:
[edit chassis node-group name node-device name pic 0]
root@qfabric# set xe port port-number
For example, to configure port Q4 to operate as a 10-Gigabit Ethernet port:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 0]
root@qfabric# set xe port 4
Review your configuration and issue the
3.
[edit]
root@qfabric# commit
commit complete
To delete the 10-Gigabit Ethernet (xe) port configuration for a block of ports, specify
4.
a port range:
[edit chassis node-group name node-device name pic 0]
root@qfabric# delete xe port-range port-range-low port-range-high
For example, to delete the 10-Gigabit Ethernet port configuration for ports Q4 through
Q7:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 0]
commit command.
Copyright © 2018, Juniper Networks, Inc.