Figure 258: Removing A 16-Port Front Card From A Qfx3008-I Interconnect; Device - Juniper QFabric QFX3000-G Hardware Documentation

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Taking care not to touch the leads, pins, or solder connections, place the other hand
5.
on the base of the front card to support its weight and slide it out of the chassis
completely.
Place the front card in the antistatic bag or on the antistatic mat.
6.
If you are not replacing the front card, install the cover panel over the empty slot by
7.
rotating the knob on the top and bottom of the cover panel to the closed position.
Figure 258: Removing a 16-Port Front Card from a QFX3008-I Interconnect Device
Ejector
lever
Installing a 16-Port QSFP+ Front Card in a QFX3008-I Interconnect Device on page 636
16-Port QSFP+ Front Cards in a QFX3008-I Interconnect Device on page 52
16-Port QSFP+ Front Card LEDs on a QFX3008-I Interconnect Device on page 731
Chapter 41: Replacing QFX3008-I Components
635