Figure 381: Location Of The Serial Number Id Label On The 4-Port 10Gbe Uplink Module For Ex4300-48Mp Switches - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Locating the Serial Number on an EX4200 Switch or Component
Listing the Switch and Components Details with the CLI
880
Figure 381: Location of the Serial Number ID Label on the 4-Port 10GbE Uplink Module
for EX4300-48MP Switches
If you are returning a switch or hardware component to Juniper Networks for repair or
replacement, you must locate the serial number of the switch or component. You must
provide the serial number to the Juniper Networks Technical Assistance Center (JTAC)
when you contact them to obtain Return Materials Authorization (RMA).
If the switch is operational and you can access the CLI, you can list serial numbers for
the switch and for some components with a CLI command. If you do not have access to
the CLI or if the serial number for the component does not appear in the command output,
you can locate the serial number ID label on the physical switch or component (see
Figure 382 on page 881).
NOTE: If you want to find the serial number on the physical switch component,
you will need to remove the component from the switch chassis, for which
you must have the required parts and tools available.
Listing the Switch and Components Details with the CLI on page 880
Locating the Chassis Serial Number ID Label on an EX4200 Switch on page 881
Locating the Serial Number ID Labels on FRUs in an EX4200 Switch on page 881
To list the switch and switch components and their serial numbers, enter the following
CLI command:
user@switch> show chassis hardware
Hardware inventory:
Item Version
Chassis
Routing Engine 0 REV 11
FPC 0 REV 11
CPU
Serial number ID label
Part number Serial number
BM0208327733
750-021256 BM0208327733
750-021256 BM0208327733
BUILTIN BUILTIN
Description
EX4200-24T
EX4200-24T, 8 POE
EX4200-24T, 8 POE
FPC CPU
Copyright © 2018, Juniper Networks, Inc.