Juniper QFabric QFX3000-G Hardware Documentation page 606

QFX3000-G QFabric System Hardware Documentation
Related
Documentation
556
QFabric component Password
Product Type:
Confirm the backup restoration.
4.
[y/n]: y
The Director device displays the configuration.
Saving temporary configuration...
Configuring peer...
Configuring local interfaces...
Configuring interface eth0 with [10.49.214.74/24:10.49.214.254]
Configured interface eth0 with [10.49.214.74/24:10.49.214.254]
Configuring QFabric software with an initial pool of 4000 MAC addresses
[00:11:00:00:00:00 - 00:11:00:00:0f:3b]
Configuring QFabric address [10.49.214.150]
Reconfiguring QFabric software static configuration
Applying the new Director device password
Applying the QFabric component password
Configuration complete. Director Group services will auto start within 30
seconds.
Generating the MAC Address Range for a QFabric System
Gaining Access to the QFabric System Through the Default Partition
QFabric System Initial and Default Configuration Information
Installing and Connecting a QFX3100 Director Device on page 377
Performing a QFabric System Recovery Installation on the Director Group on page 841
request system software configuration-backup
device-authentication
[********]
[QFX3000-G]
Copyright © 2018, Juniper Networks, Inc.