Juniper QFabric QFX3000-G Hardware Documentation page 619

Copyright © 2018, Juniper Networks, Inc.
Size Used Avail Used% Mounted on
---- ---- ----- ----- ----------
423G 9.8G 391G 3%
99M 16M 79M 17%
93G 11G 83G 12%
Director Group Processes
------------------------
Director Group Manager
Partition Manager
Software Mirroring
Shared File System master
Secure Shell Process
Network File System
DHCP Server master
FTP Server
Syslog
Distributed Management
SNMP Trap Forwarder
SNMP Process
Platform Management
Interface Link Status
---------------------
Management Interface
Control Plane Bridge
Control Plane LAG
CP Link [0/2]
CP Link [0/1]
CP Link [0/0]
CP Link [1/2]
CP Link [1/1]
CP Link [1/0]
Crossover LAG
CP Link [0/3]
CP Link [1/3]
Verify that the Routing Engine services are running on the QFX3100 Director device
6.
using the show fabric administration inventory infrastructure operational-mode CLI
command from the QFabric default partition CLI.
You see the following output (or something similar) after entering the command:
dg0:
Routing Engine Type
-------------------------------------------------------------------------
Fabric manager
Network Node group
Fabric control
Diagnostic
dg1:
Routing Engine Type
-------------------------------------------------------------------------
Fabric manager
Network Node group
Fabric control
Chapter 39: Removing or Replacing a Device
/
/boot
/pbdata
online
online
online
online
online
online
online backup
online
online
online
online
online
online
up
up
up
up
up
up
down
down
down
up
up
up
Hostname
FM-0
QFabric_default_NW-NG-1_RE1
QFabric_default_FC-1_RE0
QFabric_DRE
Hostname
FM-1
QFabric_default_NW-NG-0_RE0
QFabric_default_FC-0_RE0
PID CPU-Use(%)
9832 1.0
24633 4.2
25374 1.8
6789 1.3
PID CPU-Use(%)
572 1.6
19217 7.8
20071 1.9
569