Figure 178: Mounting The Switch On Two Posts In A Rack - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

Documentation

Figure 178: Mounting the Switch on Two Posts in a Rack

Mounting rack

Have the second person use the four mounting screws (and cage nuts and washers

if your rack requires them) to screw the mounting bracket to the rack.

Attach a ground cable to earth ground and then attach it to the chassis grounding

points, as described in

"Connecting Earth Ground to a QFX5100 Device" on page

Rack-Mounting and Cabinet-Mounting Warnings on page 343

Connecting AC Power to a QFX5100 Device on page 443

Connecting Earth Ground to a QFX5100 Device on page 442

Chapter 31: Installing a QFX5100 Node Device

Mounting bracket

Table of Contents