Table 246: Qfx3600 And Qfx3600-I Chassis Alarm Messages - Juniper QFabric QFX3000-G Hardware Documentation

Table 246: QFX3600 and QFX3600-I Chassis Alarm Messages

Component Alarm Type
Fans Major (red)
Minor (yellow)
Copyright © 2018, Juniper Networks, Inc.
CLI Message
Fan Failure
Fan I2C Failure
Fan fan-number Not Spinning
Fan/Blower Absent
Chapter 59: Alarms and System Log Messages
Recommended Action
Replace the fan and report the failure to
customer support.
Check the system log for one of the
following messages and report the error
message to customer support:
CM ENV Monitor: Get fan speed failed
Fan-number is NOT spinning @ correct
speed , where fan-number
or 3.
Remove and check the fan for
obstructions, and then reinsert the fan. If
the problem persists, replace the fan.
The fan is missing. Install a fan.
.
may be 1, 2,
903