Figure 318: Control Board Leds On A Qfx3008-I Interconnect Device - Juniper QFabric QFX3000-G Hardware Documentation

Table 163: Chassis Status LEDs on a QFX3008-I Interconnect Device (continued)
Description Color
System status Unlit
Green
Amber
Related
Documentation
Control Board LEDs on a QFX3008-I Interconnect Device
Copyright © 2018, Juniper Networks, Inc.
State
Off
On steadily
Intermittent blinking
Blinking
Front Panel Display of the QFX3008-I Interconnect Device on page 47
Understanding Alarms on page 897
request chassis beacon
Each Control Board has three LEDs on the left side of the module front panel that indicate
Control Board status. Each SFP+ management port has two LEDs that indicate link status
and activity. See Figure 318 on page

Figure 318: Control Board LEDs on a QFX3008-I Interconnect Device

Console Auxiliary
port
USB
port
Ejector levers
Control board
status LEDs
Table 164 on page 730 describes these LEDs, their colors and states, and the status they
indicate.
Chapter 50: Viewing QFX3008-I System Information
Description
The device is powered off.
The fan trays and front and rear cards are
operating normally.
The beacon feature has been enabled on the
device using the
command.
One or more fan tray or front or rear card
component failures are generating one or more
alarms.
729.
port
Management SFP
port ports
request chassis beacon
Status and
Link/Activity LEDs
729