Table 108: Ac Power Cord Specifications For A Single-Phase Wiring Tray - Juniper QFabric QFX3000-G Hardware Documentation

Hide thumbs Also See for QFabric QFX3000-G:

Table of Contents

QFX3000-G QFabric System Hardware Documentation

Table 108: AC Power Cord Specifications for a Single-Phase Wiring Tray

Country/Region

Europe (except Italy, Switzerland, and

United Kingdom)

supply cord. This separate protective earthing terminal must be permanently

connected to earth.

The AC power cord for the device is intended for use with the

device only and not for any other use.

Translation from Japanese: The attached power cable is only for

this product. Do not use the cable for another product.

Power cords and cables must not block access to device

components or drape where people could trip on them.

In North America, AC power cords must not exceed 4.5 m

(approximately 14.75 ft) in length, to comply with National Electrical Code

(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical

Code (CEC) Section 4-010(3). The cords supplied with the router are in

Table 108 on page 284

provides specifications for the AC power cord provided for each

region supported.

Electrical Specifications

250 VAC, 15 A, 50 Hz

250 VAC, 16 A, 50 Hz

Plug Standards

AS/NZS 3112 Type SAA/3/15

GB 1002 Type PRC/3/16

CEE (7) VII Type VIIG

CEI 23-16 Type I/3/16

Table of Contents