Juniper QFabric QFX3000-G Hardware Documentation page 391

Hide thumbs Also See for QFabric QFX3000-G:
Table of Contents

Advertisement

Related
Documentation
Chassis Lifting Guidelines for EX4300 Switches
Related
Documentation
Chassis Lifting Guidelines for EX4200 Switches
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 329
Installation Instructions Warning on page 337
Mounting a QFX3500 Device in a Rack or Cabinet on page 475
The weight of an EX4300 switch is approximately 13 lb (5.9 kg). Observe the following
guidelines for lifting and moving the switch:
Before moving the switch to a site, ensure that the site meets the power, environmental,
and clearance requirements specified in the
Switches" on page
215.
Before lifting or moving the switch, disconnect all external cables and wires.
As when lifting any heavy object, ensure that most of the weight is borne by your legs
rather than your back. Keep your knees bent and your back relatively straight. Do not
twist your body as you lift. Balance the load evenly and be sure that your footing is firm.
General Safety Guidelines and Warnings on page 329
Installation Instructions Warning on page 337
Mounting an EX4300 Switch
The weight of a fully loaded EX4200 switch chassis is approximately 22 lb (10 kg). Observe
the following guidelines for lifting and moving an EX4200 switch:
Before installing an EX4200 switch, read the guidelines in
for EX4200 Switches" on page 216
power, environmental, and clearance requirements.
Before lifting or moving the EX4200 switch, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
General Safety Guidelines and Warnings on page 329
Installation Instructions Warning on page 337
Mounting an EX4200 Switch
Chapter 23: Installation and Maintenance Safety Information
"Site Preparation Checklist for EX4300
"Site Preparation Checklist
to verify that the intended site meets the specified
341

Advertisement

Table of Contents
loading

Table of Contents