Table 163: Chassis Status Leds On A Qfx3008-I Interconnect Device - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation

Table 163: Chassis Status LEDs on a QFX3008-I Interconnect Device

Description Color
Minor alarm (triangle) Unlit
Yellow or Amber
Major alarm (round) Unlit
Red
Fan trays Unlit
Amber
Green
Power supplies Unlit
Amber
Green
System power Unlit
Amber
Green
728
State Description
Off No alarm.
On steadily A minor alarm indicates a noncritical condition
that requires monitoring or maintenance. A minor
alarm that is left unchecked might cause
interruption in service or performance
degradation. The minor and major alarm LEDs
can be lit simultaneously. See
Messages on a QFX3008-I Interconnect Device"
on page
Off No alarm.
On steadily A major alarm indicates a critical error condition
that requires immediate action. The minor and
major alarm LEDs can be lit simultaneously. See
"Chassis Alarm Messages on a QFX3008-I
Interconnect Device" on page
Off There is no power to the component.
Blinking There is a component failure, and the indicated
fan tray should be replaced.
On steadily The fan tray is operating normally.
Off There is no input power to the power supply.
Blinking There is a component failure, and the indicated
power supply should be replaced.
On steadily The AC input and DC output for the power supply
are OK.
Off The device is powered off.
Blinking One or more power component failures are
generating one or more alarms.
On steadily The AC input and DC output for the system are
OK.
"Chassis Alarm
898.
898.
Copyright © 2018, Juniper Networks, Inc.