Viewing Ex4300 System Information; Figure 342: Lcd Panel In Ex4300 Switches - Juniper QFabric QFX3000-G Hardware Documentation

CHAPTER 54

Viewing EX4300 System Information

LCD Panel in EX4300 Switches
Copyright © 2018, Juniper Networks, Inc.
LCD Panel in EX4300 Switches on page 765
Chassis Status LEDs on EX4300 Switches on page 769
Management Port LEDs on EX4300 Switches on page 772
Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on EX4300
Switches on page 773
AC Power Supply LEDs in EX4300 Switches on page 778
DC Power Supply LEDs in EX4300 Switches on page 779
Dashboard for EX Series Switches on page 780
The LCD panel on the front panel of the EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches shows two lines of text, each with a maximum of 16 characters.
The LCD panel displays a variety of information about the switch and also provides a
menu to perform basic operations such as initial setup and reboot.
NOTE: There is no LCD panel on EX4300-48MP and EX4300-48MP-S
switches.
There are two navigation buttons—Menu and Enter—to the right of the LCD panel.
See Figure 342 on page 765.

Figure 342: LCD Panel in EX4300 Switches

1— LCD panel
2— LCD panel Enter button
3— LCD panel Menu button
4— Chassis status LEDs
765