Juniper QFabric QFX3000-G Hardware Documentation page 767

Copyright © 2018, Juniper Networks, Inc.
root@qfabric# delete xe port-range 4 7
To delete the 10-Gigabit Ethernet (xe) port configuration for an individual port, specify
5.
a port number:
[edit chassis node-group name node-device name pic 0]
root@qfabric# delete xe port port-number
For example, to delete the 10-Gigabit Ethernet port configuration for port Q4:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 0]
root@qfabric# delete xe port 4
The following steps describe how to configure either a block of ports or an individual port
to operate as 40-Gigabit Ethernet (xle) ports, as well as how to delete a 40-Gigabit
Ethernet (xle) port configuration.
To configure a block of ports to operate as 40-Gigabit Ethernet (xle) ports, specify a
1.
port range:
[edit chassis node-group name node-device name pic 1]
root@qfabric# set xle port-range port-range-low port-range-high
For example, to configure ports Q4 through Q7 to operate as 40-Gigabit Ethernet
ports:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 1]
root@qfabric# set xle port-range 4 7
To configure an individual port to operate as a 40-Gigabit Ethernet (xle) port, specify
2.
a port number:
[edit chassis node-group name node-device name pic 1]
root@qfabric# set xle port port-number
For example, to configure port Q4 to operate as a 40-Gigabit Ethernet port:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 1]
root@qfabric# set xle port 4
Review your configuration and issue the
3.
[edit]
root@qfabric# commit
commit complete
To delete the 40-Gigabit Ethernet (xle) port configuration for block of ports, specify
4.
a port range:
[edit chassis node-group name node-device name pic 1]
root@qfabric# delete xle port-range port-range-low port-range-high
For example, to delete the 40-Gigabit Ethernet port configuration for ports Q4 through
Q7:
[edit chassis node-group BBAK8281 node-device BBAK8309 pic 1]
Chapter 47: Replacing Transceivers and Fiber-Optic Cables
commit command.
717