Table 157: Qfx3500 Node Device-To-Virtual Chassis Fiber-Based Control Plane; Table 158: Qfx3500 Node Device-To-Ex4300 Virtual Chassis Copper-Based - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Table 157: QFX3500 Node Device-to-Virtual Chassis Fiber-Based Control Plane Port Assignments
Member 0 Member 1
Node: 0 Node: 16
ge-0/0/0 ge-1/0/0
Node: 1 Node: 17
ge-0/0/1 ge-1/0/1
... ...
Node: 14 Node: 30
ge-0/0/14 ge-1/0/14
Node: 15 Node: 31
ge-0/0/15 ge-1/0/15
Table 158: QFX3500 Node Device-to-EX4300 Virtual Chassis Copper-Based Control Plane Port Assignments
Member 0
Node 0: ge-0/0/0
Node 1: ge-0/0/1
542
Ensure that you have installed 1-Gigabit Ethernet SFP transceivers in the ports you are
using on each EX Series switch (see Installing a Transceiver). For a list of supported
transceivers, see
The Hardware Compatibility Tool
Ensure that you have appropriate fiber-optic cables.
Ensure that you have taken the necessary precautions for safe handling of lasers (see
"Laser and LED Safety Guidelines and Warnings for the QFX Series" on page
Use Table 157 on page 542
device-to-Virtual Chassis port mappings. Specific ports have been reserved on the
Virtual Chassis to connect to each of the QFX Series device types. Such design simplifies
installation and facilitates timely deployment of a QFabric system. It also permits the
use of a standard Virtual Chassis configuration (see Example: Configuring a Fiber-Based
Control Plane for the QFX3000-G QFabric System).
NOTE: The numerical identifiers for each Node device below are not
preassigned to the Node devices that are shipped to you. They represent
the order in which you connect the Node devices. For example, the first
Node device (Node 0) is connected to port
Chassis.
Member 2 Member 3
Node: 32 Node: 48
ge-2/0/0 ge-3/0/0
Node: 33 Node: 49
ge-2/0/1 ge-3/0/1
... ...
Node: 46 Node: 62
ge-2/0/14 ge-3/0/14
Node: 47 Node: 63
ge-2/0/15 ge-3/0/15
Member 1
Node 32: ge-1/0/0
Node 33: ge-1/0/1
.
and Table 158 on page 542
Member 4 Member 5
Node: 64 Node: 80
ge-4/0/0 ge-5/0/0
Node: 65 Node: 81
ge-4/0/1 ge-5/0/1
... ...
Node: 78 Node: 94
ge-4/0/14 ge-5/0/14
Node: 79 Node: 95
ge-4/0/15 ge-5/0/15
Member 2
Node 64: ge-2/0/0
Node 65: ge-2/0/1
350).
to determine the QFX3500 Node
on each Virtual
ge-0/0/0
Member 6 Member 7
Node: 96 Node: 112
ge-6/0/0 ge-7/0/0
Node: 97 Node: 113
ge-6/0/1 ge-7/0/1
... ...
Node: 110 Node: 126
ge-6/0/14 ge-7/0/14
Node: 111 Node: 127
ge-6/0/15 ge-7/0/15
Member 3
Node 96: ge-3/0/0
Node 97: ge-3/0/1
Copyright © 2018, Juniper Networks, Inc.