Juniper QFabric QFX3000-G Hardware Documentation page 425

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Connecting a QFX3600 Node Device to a QFX3008-I Interconnect Device on page 547
Connecting a QFX5100 Node Device to a QFX3008-I Interconnect Device on page 545
Configure each Virtual Chassis using the recommended configuration described in
8.
Example: Configuring the Virtual Chassis for a Copper-Based QFX3000-G QFabric
System Control Plane. Leave the Virtual Chassis powered on.
Power on each QFX3008-I Interconnect device. See
9.
Interconnect Device" on page
Power on the QFX3100 Director devices and complete the initial configuration for the
10.
QFX3000-G QFabric system described in
Setup on a QFX3100 Director Group" on page
QFabric System Initial and Default Configuration Information
"Powering On a QFX3008-I
425.
"Performing the QFabric System Initial
551.
Chapter 27: Before You Begin
375