Table 152: Interconnect Device Port Mappings - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation

Table 152: Interconnect Device Port Mappings

Interconnect
Device Virtual Chassis VC0
IC0
CB0, port 0
CB1, port 0
IC1 CB0, port 0
CB1, port 0
IC2
CB0, port 0
CB1, port 0
IC3 CB0, port 0
CB1, port 0
530
NOTE: The two Control Boards in each Interconnect device are labeled
and in Figure 228 on page 528
CB0 CB1
Interconnect devices IC2 and IC3 are not shown in
and describe the port mappings for the optional third and fourth
Interconnect devices
to
ge-0/0/19
to
ge-1/0/19
to ge-2/0/19
to ge-3/0/19
to
ge-0/0/18
to
ge-1/0/18
to ge-2/0/18
to ge-3/0/18
and Table 152 on page
Figure 228 on page 528
Virtual Chassis VC1
to
CB0, port 1 ge-0/0/19
to
CB1, port 1 ge-1/0/19
CB0, port 1 to ge-2/0/19
CB1, port 1 to ge-3/0/19
to
CB0, port 1 ge-0/0/18
to
CB1, port 1 ge-1/0/18
CB0, port 1 to ge-2/0/18
CB1, port 1 to ge-3/0/18
Copyright © 2018, Juniper Networks, Inc.
530.