Figure 37: Qfx5100-48Thport Panel; Figure 38: Qfx5100-24Q Port Panel - Juniper QFabric QFX3000-G Hardware Documentation

Copyright © 2018, Juniper Networks, Inc.

Figure 37: QFX5100-48THPort Panel

QFX5100-24Q
As shown in Figure 38 on page
switch with 24 high-density QSFP+ ports. Each QSFP+ port can operate as a native
40 Gbps port or as 4 independent 10 Gbps ports. The QFX5100-24Q switch has a 1 U
form factor and comes standard with redundant fans and redundant power supplies.
The switch can be ordered with either ports-to-FRUs or FRUs-to-ports airflow and
with AC or DC power supplies.
The QFX5100-24Q switch has two module bays for the optional expansion module,
QFX-EM-4Q, which can add a total of 8 additional QSFP+ ports to the chassis. When
operating as a standalone switch and fully populated with QFX-EM-4Q Expansion
Modules, the QFX5100-24Q switch is equivalent to 80 10 Gbps interfaces and 4
40-Gbps interfaces. Of these total ports, 104 logical ports are available for 10G port
channelization. For full details on the different port channelization modes, see
Panel of a QFX5100-24Q Device" on page
QFX-EM-4Q can be configured as either access ports or as uplinks. The QFX5100-24Q
switch provides full duplex throughput of 2.56 Tbps.

Figure 38: QFX5100-24Q Port Panel

The QFX5100-24Q can be used as:
A standalone switch.
An interconnect device in a QFX3000-M QFabric system.
A Node device in a QFabric system.
The QFX5100-24Q is supported on both the QFX3000-G and QFX3000-M QFabric
systems. A QFX5100-24Q Node device is equivalent to 80 10-Gbps interfaces and
4 40-Gbps interfaces.
A master, backup, or line card in a QFX Virtual Chassis.
A QFX Series Virtual Chassis allows you to interconnect up to 10 QFX3500, QFX3600,
or QFX5100 switches into one logical device and manage the device as a single
chassis in a ring topology.
Use QFX5100-24Q switches as the master and backup in a QFX Virtual Chassis.
67, the QFX5100-24Q is a 40-Gigabit Ethernet QSFP+
81. All ports on the QFX5100-24Q and
Chapter 4: QFX5100 Overview
"Port
67