Juniper QFabric QFX3000-G Hardware Documentation page 154

QFX3000-G QFabric System Hardware Documentation
Table 17: Chassis Physical Specifications for QFX3600 and QFX3600-I Devices (continued)
Description
Weight
Related
Documentation
Front Panel of a QFX3600 Device
104
Value
With FRUs installed: 20.5 lb (9.3 kg)
Without FRUs installed: 14.6 lb (6.6 kg)
AC power supply: 2.2 lb (1 kg)
DC power supply: 2.2 lb (1 kg)
Fan tray: 0.9 lb (0.4 kg)
Rack Requirements for a QFX3600 or QFX3600-I Device on page 233
Cabinet Requirements for a QFX3600 or QFX3600-I Device on page 241
Installing and Connecting a QFX3600 or QFX3600-I Device on page 453
Installing and Removing QFX3600 or QFX3600-I Device Hardware Components on
page 657
The front panel of the QFX3600 device consists of the following components:
LCD panel—The LCD panel displays the device hostname and the number of active
alarms.
TIP: Alternatively, you can use the
what is currently displayed on the LCD panel.
Chassis status LEDs
USB port
Console ( ) port
CON
Management ports—The QFX3600 device has four management ports. The ports
labeled and are 1000BASE-T RJ-45 ports, and the ports labeled
C0 C1
are 1-Gbps SFP ports.
If you are using the QFX3600 device as a Node device in a QFabric system, these
ports are used to connect the QFX3600 device to the QFabric system control plane
and management network. See
Systems" on page 258
cables.
If you are using the QFX3600 device as a standalone switch, these ports are used
to connect the QFX3600 device to a management network. See
for Console and Management Connections for the QFX Series" on page 268
information about the required cables.
show chassis lcd
"Determining Transceiver Support for QFabric
for information about the supported transceivers and required
CLI command to view
and
C0S
"Cable Specifications
Copyright © 2018, Juniper Networks, Inc.
C1S
for