Juniper QFabric QFX3000-G Hardware Documentation page 558

QFX3000-G QFabric System Hardware Documentation
508
To connect each QFX3008-I Interconnect Device to the QFX3000-G QFabric system
control plane network (see
Connect the first Interconnect device.
1.
Connect one end of the first RJ-45 patch cable to the first SFP management port
a.
(labeled 0 ) on the first Control Board (labeled
Connect the other end of that cable to port
b.
Connect one end of the second RJ-45 patch cable to the second SFP management
c.
port (labeled ) on the first Control Board (labeled
1
Connect the other end of that cable to port
d.
Connect one end of the third RJ-45 patch cable to the first SFP management port
e.
(labeled ) on the second Control Board (labeled
0
Connect the other end of that cable to port
f.
Connect one end of the fourth RJ-45 patch cable to the second SFP management
g.
port (labeled ) on the second Control Board (labeled
1
Connect the other end of that cable to port
h.
Connect the second Interconnect device.
2.
Connect one end of the first RJ-45 patch cable to the first SFP management port
a.
(labeled 0 ) on the first Control Board (labeled
Connect the other end of that cable to port
b.
Connect one end of the second RJ-45 patch cable to the second SFP management
c.
port (labeled 1 ) on the first Control Board (labeled
Connect the other end of that cable to port
d.
Connect one end of the third RJ-45 patch cable to the first SFP management port
e.
(labeled ) on the second Control Board (labeled
0
Connect the other end of that cable to port
f.
Connect one end of the fourth RJ-45 patch cable to the second SFP management
g.
port (labeled ) on the second Control Board (labeled
1
Figure 218 on page 506:
CB 0
ge-0/0/39
ge-0/0/39
ge-1/0/39
ge-1/0/39
CB 0
ge-2/0/39
ge-2/0/39
ge-3/0/39
).
on the first Virtual Chassis.
).
CB 0
on the second Virtual Chassis.
).
CB 1
on the first Virtual Chassis.
).
CB 1
on the second Virtual Chassis.
).
on the first Virtual Chassis.
CB 0 ).
on the second Virtual Chassis.
).
CB 1
on the first Virtual Chassis.
).
CB 1
Copyright © 2018, Juniper Networks, Inc.