Juniper QFabric QFX3000-G Hardware Documentation page 938

QFX3000-G QFabric System Hardware Documentation
Packing a QFX3600 or QFX3600-I Device for Shipping
Packing QFX3600 or QFX3600-I Device Components for Shipping
888
To pack a QFX3600 or QFX3600-I device for shipping:
Power down the device and remove the power cables. See Powering Off a QFX3600
1.
Device.
Remove the cables that connect the QFX3600 or QFX3600-I device to all external
2.
devices.
Remove all field-replaceable units (FRUs) from the device.
3.
Have one person support the weight of the device while another person unscrews and
4.
removes the mounting screws.
Remove the device from the rack or cabinet (see
5.
QFX3600 or QFX3600-I Device" on page
bag.
Place the device in the shipping carton.
6.
Place the packing foam on top of and around the device.
7.
If you are returning accessories or FRUs with the device, pack them as instructed in
8.
"Packing QFX3600 or QFX3600-I Device Components for Shipping" on page
Replace the accessory box on top of the packing foam.
9.
Close the top of the cardboard shipping box and seal it with packing tape.
10.
Write the RMA number on the exterior of the box to ensure proper tracking.
11.
CAUTION: Do not stack device components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX3600 or QFX3600-I device components:
Place individual FRUs in antistatic bags.
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
"Chassis Lifting Guidelines for a
340) and place the device in an antistatic
Copyright © 2018, Juniper Networks, Inc.
888.