Figure 47: Leds On The Qsfp+ Uplink Ports; Table 12: Port Leds On A Qfx5100-24Q Switch - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation

Table 12: Port LEDs on a QFX5100-24Q Switch

Color State
Unlit Off
Green On steadily
Blinking
Amber Blinking
Related
Documentation
84

Figure 47: LEDs on the QSFP+ Uplink Ports

Table 12 on page 84 describes the SFP+ access port LEDs.
Field-Replaceable Units in a QFX5100 Device on page 75
Port Panel of QFX5100-48S and QFX5100-48SH Devices on page 77
Port Panel of a QFX5100-96S Device
Channelizing Interfaces Overview
Access Port and Uplink Port LEDs on a QFX5100 Device on page 741
Installing and Removing QFX5100 Device Hardware Components on page 665
Connecting QFX Series and EX Series Switches in a QFX Virtual Chassis
Description
The port is administratively disabled, there is no power, or there is
a fault.
NOTE: When configured for channelized 10-Gigabit Ethernet, the
LED remains unlit only if all four of the 10-Gigabit Ethernet SFP+
breakout links are down.
A link is established, but there is no link activity.
NOTE: When configured for channelized 10-Gigabit Ethernet, the
LED is lit green when at least one of the four 10-Gigabit Ethernet
SFP+ breakout links is established.
A link is established, and there is link activity.
NOTE: When configured for channelized 10-Gigabit Ethernet, the
LED is lit green when at least one of the four 10-Gigabit Ethernet
SFP+ breakout links is established.
All four LEDs blink to indicate the beacon function was enabled on
the port.
Copyright © 2018, Juniper Networks, Inc.