Juniper QFabric QFX3000-G Hardware Documentation page 902

QFX3000-G QFabric System Hardware Documentation
852
enter the LSI Corp Configuration Utility to investigate!
Press Ctrl-C to start LSI Corp Configuration Utility...
Pressing Ctrl+c starts the configuration utility, which after initialization, displays the
Adapter List page.
Use the arrow keys to select the default adapter, and press Enter to open the Adapter
3.
Properties page.
Use the arrow keys to select
4.
options.
Use the arrow keys to select
5.
RAID. The following example shows two inactive HDD modules:
* LSI Corp Config Utility
*
* View Array -- SAS1068E
*
* Array
*
* Identifier
*
* Type
*
* Scan Order
*
* Size(MB)
*
* Status
*
*
*
* Manage Array
*
*
*
* Slot Device Identifier
*
* Num
*
* 0 ATA WDC WD2003FYYS-01D01
**
* 1 ATA WDC WD2003FYYS-01D01
**
*
*
*
*
*
*
*
*
*
*
*
, and press Enter to see the Array Type
RAID Properties
View Existing Array , and press Enter to see the existing
v6.30.00.00 (2009.11.12)
1 of 1
IM
---
1907348
Inactive
RAID Hot
Disk Spr
Yes No
Yes No
Copyright © 2018, Juniper Networks, Inc.
Drive Pred Size
Status Fail (MB)
Inactive No 1907348
Inactive No 1907348